产品简介 Product Brief Introduction
| 无氨发泡剂母粒是以LDPE材料作载体，针对PE模压二次发泡工艺专门研发而成。使用过程中不需再添加ZnO等催化剂，具有无氨味，无粉尘，称量方便的特点，适用于对环保要求高的发泡材料。 The ammonia-free foaming agent is based on LDPE material,and developed for the foaming process of PE by two-step compression molding specifically.The use of ammonia-free foaming agent in the process does not need to add ZnO and other catalysts.It is suitable for high environmental requirements of the foam material,with the advantages of ammonia-free,dust-free,and easy weighing. |  |
产品质量指标 Product Quality Indicators
| 产品系列 | 产品型号 | 发气量（ml/g） | 分解温度（℃） | 外观 | 化学成份 |
| 无氨发泡剂母粒 | 无氨发泡剂母粒 | 100~110 | 188±3 | 淡黄色颗粒 | 改性偶氮二甲酰胺 |
应用 Application
应用于LDPE、EVA模压二次工艺生产。
本产品LDPE载体和有效发泡组分为1：1，由于除去了发泡气体中氨组分，有效气体总量有所降低，投加量需酌情增加。使用过程中不需添加ZnO等催化剂，否则会影响使用效果。
The ammonia-free foam series are mainly applied to the productlon process of LDPE/EVA by two-step compression molding.
The ratio of LDPE carrier and effective foaming of this product is 1:1.As the ammonia component in the foaming gas is removed,the total amount of effective gas is reduced and the dosage is increased.The use of ammonia-free foaming agent in the process does not need to add ZnO and other catalysts,otherwise the application result will be affected.
 |
储存 Storage
在常温下储存稳定性很好。需存放于阴凉干燥处，远离火源和热源。严禁与酸、碱性物质混放。着火请用水扑救。
Good storage stability at room temperature. Should be stored in a cool dry place, keep away from fire and heat source. Be forbidden to mix with acid or alkaline substances. Please put out the fire with water if necessary.