产品简介 Product Brief Introduction
PE、PVC、EVA鞋材系列发泡剂针对鞋材工艺特点由通用型发泡剂精心改良而成，具有制品白度好，泡孔细密，性价比高的特点。
PE、PVC、EVA shoes foam series are improved for shoes foaming process carefully,giving products in white，fine bubble hole,cost-effective features.
产品质量指标 Product Quality Indicators
| 产品系列 | 产品型号 | 发气量（ml/g） | 分解温度（℃） | 粒径(µm) | 说明 |
| PE、PVC、EVA鞋材系列发泡剂 | SP0607 | ≥160 | 161±3 | 8~10 | 外观：淡黄色粉末 化学成份：改性偶氮二甲酰胺 |
| SP0801 | ≥165 | 191±3 | 16~19 | ||
| SP0802 | ≥190 | ≥200 | 8~12 | ||
| SP0803 | ≥194 | ≥194 | 8~12 | ||
| SP0804 | ≥210 | ≥201 | 8~12 | ||
| SP0901 | ≥220 | ≥202 | 8~12 | ||
| SPA100 | ≥225 | ≥202 | 8~12 | ||
| SPA200 | ≥220 | ≥202 | 8~12 | ||
| SPA300 | ≥210 | ≥202 | 8~12 | ||
| SPA500 | ≥180 | 206±3 | 8~12 | ||
| SPT100 | ≥224 | 205±3 | 10~14 | ||
| SPT200 | ≥190 | 200±3 | 8~10 | ||
| SPE700 | ≥218 | 199±3 | 6~8 |
应用 Application
SP0607发泡剂主要应用于PE、EVA、橡胶等热压大模、小模中温发泡工艺。
SP0801/SP0802/SP0803/SP0804/SP0901发泡剂广泛应用于PE、PVC、EVA模压、注射、挤出等鞋材及人造革发泡制品。
SPA100/SPA200/SPA300/SPA500/SPT1OO/SPT200发泡剂主要应用于PE、EVA模压发泡片材及硬质PVC木塑挤出等发泡制品。
SPE700发泡剂主要应用于PE、EVA二次模压发泡制品。
SP0607 is mainly used for PE,EVA,rubber foaming process in hot pressing large mold or small mold middle temperature.
SP0801/SP0802/SP0803/SP0804/SP0901 are widely used for PE、PVC、EVA molding,injection,extrusion foaming products such as shoes and leather.
SPA1OO/SPA200/SPA300/SPA500/SPT1OO/SPT200 are mainly used for PE、EVA molded foaming sheets and rigid PVC plastic extrusion foaming products.
SPE700 is mainly used for PE、EVA secondary molded foaming products.
储存 Storage
在常温下储存稳定性很好。需存放于阴凉干燥处，远离火源和热源。严禁与酸、碱性物质混放。着火请用水扑救。
Good storage stability at room temperature. Should be stored in a cool dry place, keep away from fire and heat source. Be forbidden to mix with acid or alkaline substances. Please put out the fire with water if necessary.
 |